VMware bridged network Ubuntu and Windows
Setting up a Windows guest to serve to the LAN that the host Ubuntu is on is simple but a few gotchas to look out for.
My Setup:
1. Host VM Ubuntu withd 2 NICs
2. Guest VM XP Pro serving http through IIS
3. Lan with DHCP exist at Host VM level
4. Host VM uses eth0
5. VMware Server
Getting it to work:
- For the Network Adapter config for the guest VM select the Bridged Network created during install of VMware server (eth1 in my case since eth0 is assigned to host VM)
- On host VM Ubuntu, goto System>Preferences>Network Connections
- Edit eth1
- Uncheck Available to all users
- Goto IPv4 Settings tab
- Change method to Link-Local Only
- Apply and close
- Refresh NICs
- Make sure ifconfig does not show an IP address from the subnet of your LAN on eth1
- Since guest VM XP is to serve http, it should have a static IP
- Goto guest VM
- Set TCP/IP for the Local Area Connection to a static IP within the subnet of the LAN
- Run ipconfig /refresh in command line
- Make sure ipconfig shows the correct IP info just set
- Make sure it can connect to internet
- Make sure Windows Firewall is not blocking http or port 80 (obvious step but it threw me for a loop for a little while)
- Now just check from host VM to see if a test webpage shows up
How to do that Mysql thing in MSSql?
Ever wonder how to translate something you normally do between Mysql and MSSql?
Here is a good list of parity between the two.
Also, one section left open by that article is date formatting. After reading that, you can see why it was left out. It is quite a topic on its own.
Date Formats in MSSql
Ubuntu 9.04 Vmware Arrow Keys Problem
I finally found how to get all those keys working on my newly installed Ubuntu 9.04 with my XP VM. The issue is that all the arrow keys and delete key don't work. There are others too but not listed. So a bit of googling, I found that you have to map the keys in a vmware config file to solve the problem. So this is what needs to be done.
1. Edit /usr/lib/vmware/config
2. Add the following to the end.
xkeymap.keycode.108 = 0x138 # Alt_R
xkeymap.keycode.106 = 0x135 # KP_Divide
xkeymap.keycode.104 = 0x11c # KP_Enter
xkeymap.keycode.111 = 0x148 # Up
xkeymap.keycode.116 = 0x150 # Down
xkeymap.keycode.113 = 0x14b # Left
xkeymap.keycode.114 = 0x14d # Right
xkeymap.keycode.105 = 0x11d # Control_R
xkeymap.keycode.118 = 0x152 # Insert
xkeymap.keycode.119 = 0x153 # Delete
xkeymap.keycode.110 = 0x147 # Home
xkeymap.keycode.115 = 0x14f # End
xkeymap.keycode.112 = 0x149 # Prior
xkeymap.keycode.117 = 0x151 # Next
xkeymap.keycode.78 = 0x46 # Scroll_Lock
xkeymap.keycode.127 = 0x100 # Pause
xkeymap.keycode.133 = 0x15b # Meta_L
xkeymap.keycode.134 = 0x15c # Meta_R
xkeymap.keycode.135 = 0x15d # Menu
3. Save it
4. Restart vmware
Thank goodness. What a pain this was to use with a whole bunch of keys not working.
GRUB Error 21 Dual Boot Raid
I was installing Ubuntu to dual boot onto a newly added drive on my workstation that already has Windows XP. After the installation, GRUB gives me error 21. I looked through all the forums and help and tried everything from reinstalling GRUB to modifying menu.lst. Nothing worked. Then I figured out what the problem was. My system before adding the new drive had three drives; one with XP OS and two in a Raid 1 array for data. The issue was the Raid 1 array. With the new drive I added for Ubuntu, the computer had four drives. During installation, Ubuntu saw four drives and when installing GRUB, it pointed Ubuntu to boot on hd3,0. However, when GRUB tried to load, the BIOS was showing only three drives and hd3 was non-existent resulting in error 21.
Then I decided to move my SATA cables around so the location of the Ubuntu install does not change no matter if we saw the Raid 1 as one drive or two. So I kept XP on hd0, moved Ubuntu to hd1, and then having the Raid 1 drives to follow with hd2 and hd3. At this point, I reinstalled GRUB and tried to boot up again with the Raid 1 configured in the BIOS. Now I get GRUB error 17! What the heck is that? I found that if I got rid of Raid on the BIOS, error 17 goes away and GRUB comes up without a problem.
I got tired of trying to debug this and decided to just go all Ubuntu and just VM XP for the few things I still need to do on Windows.